What’s EVDP Functions For PoE Switch

2022-1-10 16:36:48

With the development and continuous progress of science and technology, under Ewind company unremitting research and development, finally developed a new AI-network PoE switch that integrates intelligence, security and convenience on August 8, 2020 in Shenzhen .

It has these 4 special functions: EVDP, which greatly saves manpower, material and financial resources, and also makes the equipment safer.

E（Extender 250-300M long distance）:

When you turn on the DIP 1 , It can support 250-300 meter with 10M speed rate for each port; When you turn off the DIP 1, It can support 100 meter with gigabit speed rate for each port；

V ( Vlan Isolation ) :

When you turn on the DIP 2,The Port VLAN isolation is also supported, Port 1~port 8 physical isolation.

D（Watch dog ）:

When you turn on the DIP 3 , It can support watchdog for the switch; When you turn off the DIP 2, It cannot support watchdog for the switch.

What is Watchdog function? Watchdog functions means when the switch detects failure，It will wait for 60 seconds, data returns to normal within 60 seconds; If no action is taken, the POE power supply on the port will be restarted if it still fails after 60 seconds.)

The P means Port Priority , it is set by default. It can support POWER SUPPLY Port Priority; When the total power exceeds power supply. The lowest priority port will be closed, the higher the value of the port, the lower the priority. For example: Port 5’s priority is higher than Port 6.